runtime zmeny

.gitignore

@@ -12,3 +12,4 @@ notes/.compile.lock
 cron/runs/
 wiki/*
 !wiki/config.yaml
+.env

projects/life/artifacts/trenink-log.md

@@ -7,4 +7,5 @@ Pravidlo: vynechaný den není selhání. Pásmo: podlaha 2×/týden, strop denn
 | 2026-09-11 | ✅       | první trénink po fyzio (10.9.) |
 | 2026-09-12 | ✅       | opakování |
 | 2026-09-13 | ❌       | |
-| 2026-09-14 | ✅       | |
+| 2026-09-14 | ✅       | |
+| 2026-09-15 | ✅       | + další cviky z vlastní sestavy; pravá kyčel táhne víc, kolena ztuha |

projects/life/memory.md

@@ -24,3 +24,6 @@
 - 2026-09-12: Opakování fyzio cviků (kyčel/pánev) — další trénink po zahájení 11.9., adherence drží v rámci zvoleného pásma (podlaha 2×/týden, cíl denně).
 - 2026-09-14: Založen tréninkový log (artifacts/trenink-log.md) — tabulka datum/trénink/poznámka pro fyzio cviky. Vynechaný den 13.9. bez komentáře (v rámci tolerance), 14.9. cvičil.
 - 2026-09-14: Doplněno do cílů projektu (prompt.md): dobrá mobilita hlavně kyčle, pohyb bez bolesti, ideálně pravidelné cvičení — vedle změny váhy a kondice.
+- 2026-09-15: Cvičil fyzio cviky — třetí tréninkový den za čtyři dny (11., 12., 14., 15.9.), v rámci zvoleného pásma.
+- 2026-09-15: Stav kyčle po 4 dnech cvičení: asymetrie přetrvává — pravá strana táhne o dost víc, přitahování kolen jde obecně ztuha. K fyzio sestavě zařadil i další cviky ze své obvyklé sestavy. Rozhodnutí: nová návštěva fyzioterapeutky cca 3–4 týdny po první (10.9.), tedy začátek října — v souladu s klinickou praxí (reassessment 2–3 týdny po zahájení, pak 3–4 týdny; ROM adaptace trvá týdny). Na kontrole doladit počty opakování a výdrže u cviků.
+- 2026-09-15: Upřesnění k rozšíření sestavy: další přidané cviky jsou taky protahovací — celý trénink tak zůstává čistě mobilizační, žádná zátěž navíc.

projects/life/state.md

@@ -52,6 +52,9 @@ Denní vážení, vnímaná kondice, jestli mě něco bolí.
 - Cviky uložené v `artifacts/fyzio-cviky-kycele.md` (rekonstrukce z paměti).
 - **Chybí**: počty opakování a délky výdrží — doladit s fyzioterapeutem při
   další návštěvě.
+- **Kontrola naplánovaná**: ~3–4 týdny po první návštěvě, tedy začátek října.
+- **Stav (15.9.)**: asymetrie přetrvává — pravá strana táhne víc, přitahování
+  kolen ztuha. ROM adaptace trvá týdny, čekat zlepšení.
 - **Frekvence — rozhodnuto (2026-09-11)**: denní snaha s tolerancí — vynechaný
   den není selhání. Pásmo: podlaha 2× týdně (pevná), strop denně, cokoli
   mezi = úspěch. Fyzicky stačilo i obden, denní cíl je kvůli návyku, ne

skills/usage/SKILL.md

@@ -1,10 +1,9 @@
 ---
 name: usage
 description: >
-  Show Ollama Cloud credit/usage spent via the ollama.com usage API, and
+  How much of the Ollama Cloud plan has been spent — current session and weekly
-  report continuously sampled usage history. Triggers on: "/usage",
+  usage per model, and reports over the continuously sampled history.
-  "ollama usage", "how much credit", "how much have I used up",
+  Triggers on: "ollama usage", "usage history".
-  "credits left", "quota", "usage report", "usage history".
 ---
 
 # Usage
@@ -27,9 +26,9 @@ Format (script prints it, present it to the user as-is — same lines, same
 order; translate the labels into the user's language, keep the numbers
 exact; no extra model info on the Session/Weekly lines):
 
-```
+```text
 Ollama Cloud usage
-Session: <pct> %, resets in X hours
+Session: <pct> %, resets HH:MM TZ (in H h M min)
 Weekly:  <pct> %, resets in Y days
 Models (request count, weekly window):
   <model>: <count>
@@ -38,14 +37,53 @@ Models (request count, weekly window):
 The per-model breakdown lives only in the "Models" section — never inline
 on the Session/Weekly lines.
 
-## Reset times — derived, not from the API
+Times are printed in the **server's local zone** (`Europe/Prague`), taken from
+the system — no zone is hardcoded. The session line loses its reset clause when
+the history holds no rollover to anchor the window; that is correct output,
+not a failure.
 
-`/api/usage` contains **no reset timestamps** (they exist only in the HTML
+## Reset times
-UI). The script computes them: session = until the next full hour UTC (the
+
-dashboard shows "Resets in 1 hour"), weekly = until the next Monday 00:00
+`/api/usage` carries **no reset timestamps**, neither in the body nor in the
-UTC. Rationale: session usage climbed in real time during testing (rolling
+response headers (re-checked 2026-09-15). Both are derived.
-window), weekly changes slowly — consistent with hourly/weekly windows.
+
-If the window turns out not to be calendar-based, fix `until_next_*`.
+**Weekly:** next Monday 00:00 UTC, `until_next_monday()`. Matches the dashboard.
+
+**Session: a 5-hour window anchored by the first request after the previous one
+ran out** — not a fixed grid. The length comes from
+[ollama.com/blog/transparent-pricing](https://ollama.com/blog/transparent-pricing):
+the new plans dropped the "5-hour or weekly limits" this key still has.
+
+How the anchoring was established on 2026-09-15: usage sat unchanged at
+0.077/21 requests through 05:00 UTC — a fixed grid would have zeroed it there
+and the poller would have recorded it — and only reset when a request arrived
+at 06:00, after a 93-minute pause. Reconstructing the agent's activity gives a
+consistent chain: window 00:00–05:00, then 06:00–11:00, each opened by the
+first request after the previous expiry. A fixed grid would additionally
+require that request to land exactly on a boundary by chance.
+
+So `session_window_end()` takes the **newest rollover in `samples`** and adds
+5 h. A rollover sample marks the start of a new window, not a boundary that was
+due anyway, which is why nothing is ever extrapolated past it: once the window
+runs out, the output says the next one starts with the next request rather than
+naming a time.
+
+That it is a window and not a rolling counter was measured too — usage dropped
+from 0.077/21 to 0.0/`{}` at once; a rolling counter decays gradually.
+
+**The reset is never guessed.** An earlier version assumed a calendar hour and
+printed "resets in 31 minutes" while the dashboard said "Resets in 2 hours" —
+a confident wrong number is worse than none. With no rollover in the history,
+the Session line carries the percentage alone.
+
+Do not compare our countdown against the dashboard's to the hour: the dashboard
+rounds an unknown way (it showed "4 hours" and "3 hours" seven minutes apart),
+which is why the output prints the wall-clock time too.
+
+**If the model is wrong, the report shows it.** `Rollover gap:` lines compare
+consecutive rollovers against the 5 h window — gaps longer than the block
+confirm request-anchoring, a gap exactly equal to it across a long idle stretch
+would point back to a fixed grid.
 
 ## Continuous sampling
 
@@ -63,6 +101,10 @@ Default window is the last 24 hours. Per-model **request counts** are the exact
 figure there — `limits.*.usage` has a resolution of 0.1 %, so short-interval
 percentage deltas are noise.
 
+The report ends with `Rollover gap:` lines and a `Session window:` line —
+when the window in progress started, when it ends, and how the observed
+rollovers line up against the 5 h length.
+
 ## Notes
 
 - Endpoint: `GET https://ollama.com/api/usage`, header

skills/usage/scripts/ollama_usage.py

@@ -1,25 +1,48 @@
 #!/usr/bin/env python3
-"""Ollama Cloud usage — GET https://ollama.com/api/usage with Bearer key."""
+"""Ollama Cloud usage — GET https://ollama.com/api/usage with Bearer key.
+
+Also the shared base for the poller and the report: DB location, the sample
+row shape, and the session-window arithmetic described below.
+"""
 
 from __future__ import annotations
 
+import itertools
 import json
 import os
+import sqlite3
 import sys
 import urllib.error
 import urllib.request
-from datetime import datetime, timedelta, timezone
+from datetime import UTC, datetime, timedelta
 from pathlib import Path
+from typing import NamedTuple
 
 API_URL = "https://ollama.com/api/usage"
 
+WORKSPACE = Path(__file__).resolve().parents[3]
+DB_PATH = WORKSPACE / "db" / "ollama_usage.sqlite"
+
+SAMPLE_COLUMNS = "ts, session_usage, weekly_usage, session_models, weekly_models"
+
+# Legacy plans bill in 5-hour session windows; see ollama.com/blog/transparent-pricing
+# ("no 5-hour or weekly limits" is what the *new* plans dropped).
+SESSION_BLOCK = timedelta(hours=5)
+
+
+class Sample(NamedTuple):
+    ts: str
+    session_usage: float
+    weekly_usage: float
+    session_models: str
+    weekly_models: str
+
 
 def load_api_key() -> str:
     env = os.environ.get("OLLAMA_API_KEY")
     if env:
         return env.strip()
-    # workspace root = three levels above this script
+    env_file = WORKSPACE / ".env"
-    env_file = Path(__file__).resolve().parents[3] / ".env"
     if env_file.is_file():
         for line in env_file.read_text().splitlines():
             line = line.strip()
@@ -28,17 +51,10 @@ def load_api_key() -> str:
     sys.exit("OLLAMA_API_KEY not found (neither env nor workspace/.env)")
 
 
-def until_next_full_hour(now: datetime) -> timedelta:
-    nxt = (now.replace(minute=0, second=0, microsecond=0)
-           + timedelta(hours=1))
-    return nxt - now
-
-
 def until_next_monday(now: datetime) -> timedelta:
     # days until Monday (weekday(): Mon == 0)
     days = (7 - now.weekday()) % 7 or 7
-    nxt = (now.replace(hour=0, minute=0, second=0, microsecond=0)
+    nxt = now.replace(hour=0, minute=0, second=0, microsecond=0) + timedelta(days=days)
-           + timedelta(days=days))
     return nxt - now
 
 
@@ -48,18 +64,92 @@ def fmt_delta_short(td: timedelta) -> str:
     if total >= 86400:
         return f"{int(total // 86400)} days"
     if total >= 3600:
-        return f"{round(td.total_seconds() / 3600)} hours"
+        return f"{round(total / 3600)} hours"
-    return f"{max(1, round(td.total_seconds() / 60))} minutes"
+    return f"{max(1, round(total / 60))} minutes"
+
+
+def fmt_countdown(td: timedelta) -> str:
+    """Exact countdown: '3 h 55 min'. The dashboard rounds; we do not."""
+    hours, minutes = divmod(int(td.total_seconds() // 60), 60)
+    return f"{hours} h {minutes} min" if hours else f"{minutes} min"
+
+
+def is_window_reset(previous: Sample, current: Sample) -> bool:
+    """Session window rolled over: its usage or its request total went down."""
+    previous_total = sum(json.loads(previous.session_models).values())
+    current_total = sum(json.loads(current.session_models).values())
+    return current.session_usage < previous.session_usage or current_total < previous_total
+
+
+def load_samples(conn: sqlite3.Connection, since: str | None = None, until: str | None = None) -> list[Sample]:
+    if since is None and until is None:
+        rows = conn.execute(f"SELECT {SAMPLE_COLUMNS} FROM samples ORDER BY ts")
+    else:
+        rows = conn.execute(
+            f"SELECT {SAMPLE_COLUMNS} FROM samples WHERE ts >= ? AND ts <= ? ORDER BY ts",
+            (since, until),
+        )
+    return [Sample(*row) for row in rows]
+
+
+def window_rollovers(samples: list[Sample]) -> list[datetime]:
+    """Every sample where the session window rolled over, oldest first.
+
+    The window is not on a fixed grid: it starts with the first request after
+    the previous one ran out. On 2026-09-15 usage sat unchanged through 05:00
+    UTC and only reset once a request arrived at 06:00 — so a rollover sample
+    marks the *start of a new window*, not a boundary that was due anyway.
+    """
+    return [
+        datetime.fromisoformat(current.ts)
+        for previous, current in itertools.pairwise(samples)
+        if is_window_reset(previous, current)
+    ]
+
+
+def session_window_end() -> datetime | None:
+    """End of the window in progress, or None when the history cannot show it."""
+    if not DB_PATH.is_file():
+        return None
+    conn = sqlite3.connect(DB_PATH)
+    try:
+        rollovers = window_rollovers(load_samples(conn))
+    finally:
+        conn.close()
+    return rollovers[-1] + SESSION_BLOCK if rollovers else None
+
+
+def fetch_usage() -> dict:
+    request = urllib.request.Request(
+        API_URL,
+        headers={
+            "Authorization": f"Bearer {load_api_key()}",
+            "Accept": "application/json",
+        },
+    )
+    with urllib.request.urlopen(request, timeout=15) as response:
+        return json.load(response)
+
+
+def print_session(usage: float, now: datetime) -> None:
+    percent = f"Session: {usage * 100:.1f} %"
+    end = session_window_end()
+
+    if end is None:
+        # No rollover recorded yet — the window's start is simply unknown.
+        print(percent)
+    elif end <= now:
+        # The window ran out; the next one only begins with the next request,
+        # so there is no time to count down to.
+        print(f"{percent}, window expired — the next one starts with the next request")
+    else:
+        local = end.astimezone()
+        print(f"{percent}, resets {local:%H:%M %Z} (in {fmt_countdown(end - now)})")
 
 
 def main() -> None:
-    req = urllib.request.Request(API_URL, headers={
-        "Authorization": f"Bearer {load_api_key()}",
-        "Accept": "application/json",
-    })
     try:
-        with urllib.request.urlopen(req, timeout=15) as resp:
+        data = fetch_usage()
-            data = json.load(resp)
     except urllib.error.HTTPError as e:
         sys.exit(f"ollama.com API error: HTTP {e.code}")
     except urllib.error.URLError as e:
@@ -68,24 +158,18 @@ def main() -> None:
     limits = data.get("limits", {})
     session = limits.get("session", {})
     weekly = limits.get("weekly", {})
-    now = datetime.now(timezone.utc)
+    now = datetime.now(UTC)
 
     print("Ollama Cloud usage")
-    print(
+    print_session(session.get("usage", 0.0), now)
-        f'Session: {session.get("usage", 0) * 100:.1f} %, '
+    print(f"Weekly:  {weekly.get('usage', 0) * 100:.1f} %, resets in {fmt_delta_short(until_next_monday(now))}")
-        f'resets in {fmt_delta_short(until_next_full_hour(now))}'
-    )
-    print(
-        f'Weekly:  {weekly.get("usage", 0) * 100:.1f} %, '
-        f'resets in {fmt_delta_short(until_next_monday(now))}'
-    )
 
     models = weekly.get("models", [])
     if models:
         print("Models (request count, weekly window):")
         for m in models:
-            print(f'  {m["name"]}: {m["request_count"]}')
+            print(f"  {m['name']}: {m['request_count']}")
 
 
 if __name__ == "__main__":
-    main()
+    main()

skills/usage/scripts/ollama_usage_poll.py

@@ -11,14 +11,9 @@ import json
 import sqlite3
 import sys
 import urllib.error
-import urllib.request
 from datetime import UTC, datetime
-from pathlib import Path
 
-from ollama_usage import API_URL, load_api_key
+from ollama_usage import DB_PATH, fetch_usage
-
-WORKSPACE = Path(__file__).resolve().parents[3]
-DB_PATH = WORKSPACE / "db" / "ollama_usage.sqlite"
 
 SCHEMA = """
 CREATE TABLE IF NOT EXISTS samples (
@@ -36,15 +31,6 @@ CREATE TABLE IF NOT EXISTS meta (
 """
 
 
-def fetch_usage() -> dict:
-    request = urllib.request.Request(API_URL, headers={
-        "Authorization": f"Bearer {load_api_key()}",
-        "Accept": "application/json",
-    })
-    with urllib.request.urlopen(request, timeout=15) as response:
-        return json.load(response)
-
-
 def canonical_models(models: list[dict]) -> str:
     """Stable JSON for change detection — the API returns an unordered list."""
     return json.dumps(
@@ -72,8 +58,7 @@ def record_poll(conn: sqlite3.Connection, ts: str, status: str) -> None:
 
 def latest_sample(conn: sqlite3.Connection) -> tuple | None:
     row = conn.execute(
-        "SELECT session_usage, weekly_usage, session_models, weekly_models "
+        "SELECT session_usage, weekly_usage, session_models, weekly_models FROM samples ORDER BY ts DESC LIMIT 1"
-        "FROM samples ORDER BY ts DESC LIMIT 1"
     ).fetchone()
     return row
 

skills/usage/scripts/ollama_usage_report.py

@@ -14,10 +14,16 @@ import json
 import sqlite3
 import sys
 from datetime import UTC, datetime, timedelta
-from pathlib import Path
 
-WORKSPACE = Path(__file__).resolve().parents[3]
+from ollama_usage import (
-DB_PATH = WORKSPACE / "db" / "ollama_usage.sqlite"
+    DB_PATH,
+    SESSION_BLOCK,
+    Sample,
+    fmt_countdown,
+    is_window_reset,
+    load_samples,
+    window_rollovers,
+)
 
 DEFAULT_WINDOW = timedelta(hours=24)
 GAP_MINUTES = 15
@@ -37,14 +43,6 @@ def resolve_window(args: argparse.Namespace) -> tuple[str, str]:
     return since, until
 
 
-def load_samples(conn: sqlite3.Connection, since: str, until: str) -> list[tuple]:
-    return conn.execute(
-        "SELECT ts, session_usage, weekly_usage, session_models, weekly_models "
-        "FROM samples WHERE ts >= ? AND ts <= ? ORDER BY ts",
-        (since, until),
-    ).fetchall()
-
-
 def count_deltas(previous: dict[str, int], current: dict[str, int]) -> dict[str, int]:
     names = set(previous) | set(current)
     deltas = {n: current.get(n, 0) - previous.get(n, 0) for n in names}
@@ -60,37 +58,56 @@ def minutes_between(earlier: str, later: str) -> float:
     return delta.total_seconds() / 60
 
 
-def is_window_reset(previous: tuple, current: tuple) -> bool:
+def print_rows(samples: list[Sample]) -> dict[str, int]:
-    """Session window rolled over: its usage or its request total went down."""
-    previous_total = sum(json.loads(previous[3]).values())
-    current_total = sum(json.loads(current[3]).values())
-    return current[1] < previous[1] or current_total < previous_total
-
-
-def print_rows(samples: list[tuple]) -> dict[str, int]:
     total: dict[str, int] = {}
     for previous, current in itertools.pairwise(samples):
-        gap = minutes_between(previous[0], current[0])
+        gap = minutes_between(previous.ts, current.ts)
         if gap > GAP_MINUTES:
             print(f"  … {gap:.0f} min with no recorded change (idle or poller down)")
         if is_window_reset(previous, current):
             print("  ── session window reset ──")
 
-        deltas = count_deltas(json.loads(previous[4]), json.loads(current[4]))
+        deltas = count_deltas(json.loads(previous.weekly_models), json.loads(current.weekly_models))
         for name, count in deltas.items():
             total[name] = total.get(name, 0) + count
         print(
-            f"{current[0]}  session {current[1] * 100:5.1f} %  "
+            f"{current.ts}  session {current.session_usage * 100:5.1f} %  "
-            f"weekly {current[2] * 100:5.1f} %  {format_deltas(deltas)}"
+            f"weekly {current.weekly_usage * 100:5.1f} %  {format_deltas(deltas)}"
         )
     return total
 
 
-def print_summary(samples: list[tuple], total: dict[str, int]) -> None:
+def print_window(conn: sqlite3.Connection) -> None:
+    """The session window in progress, plus the gaps that test how it is anchored.
+
+    Consecutive rollovers exactly SESSION_BLOCK apart would mean a fixed grid;
+    longer gaps mean the window is anchored by the first request after the
+    previous one ran out, which is what the data so far shows.
+    """
+    rollovers = window_rollovers(load_samples(conn))
+    if not rollovers:
+        print("Session window: no rollover recorded yet")
+        return
+
+    for previous, current in itertools.pairwise(rollovers):
+        gap = current - previous
+        verdict = "= block" if gap == SESSION_BLOCK else "> block (window is request-anchored)"
+        print(f"Rollover gap: {previous:%m-%d %H:%M} → {current:%m-%d %H:%M} = {fmt_countdown(gap)}  {verdict}")
+
+    started = rollovers[-1].astimezone()
+    ends = (rollovers[-1] + SESSION_BLOCK).astimezone()
+    now = datetime.now(UTC)
+    remaining = (
+        f"in {fmt_countdown(ends - now)}" if ends > now else "expired; next window starts with the next request"
+    )
+    print(f"Session window: started {started:%m-%d %H:%M %Z}, ends {ends:%m-%d %H:%M %Z} ({remaining})")
+
+
+def print_summary(samples: list[Sample], total: dict[str, int]) -> None:
     first, last = samples[0], samples[-1]
     print()
-    print(f"Window: {first[0]} → {last[0]}  ({len(samples)} samples)")
+    print(f"Window: {first.ts} → {last.ts}  ({len(samples)} samples)")
-    print(f"Weekly usage: {first[2] * 100:.1f} % → {last[2] * 100:.1f} %")
+    print(f"Weekly usage: {first.weekly_usage * 100:.1f} % → {last.weekly_usage * 100:.1f} %")
     print(f"Requests: {format_deltas(total)}")
 
 
@@ -116,6 +133,7 @@ def main() -> None:
 
     total = print_rows(samples)
     print_summary(samples, total)
+    print_window(conn)
     print_poll_status(conn)